Conveyor Belt Cleaning Tool w/ Suction, 500mm (20in)
$2,133.47
This tool mounts above conveyor belts and uses dry steam from the Optima Steamer™ to quickly clean and sanitize as the belts run. Steam is delivered in an enclosed compartment to aid in sanitation and eliminate overspray contamination, while waste matter is removed via port for vacuum hook-up. Cleaning compartment measures 500mm (20in) wide.
Cancelled orders regardless of fulfillment will incur a 5% processing fee.
Orders submitted after 10am PT/1pm ET with same-day processing/shipping request can only be guaranteed to ship the following business day.
If an order cannot be fulfilled within 2 business days due to inventory or logistical complications, Steamericas staff will contact you as soon as possible.
Vapor steam reaches temperatures well above 212°F, water’s boiling point and what makes it a gas. Hot water from your pressure washer or plant steam from your in house boiler only creates diffused water particles or mist (wet steam), and the output is typically below 180°F
No Waste Water / Run-Off
Vapor steam is a gas and has far fewer water molecules, producing little to NO wastewater. Hot water and in-house boiler steam leads to runoff and requires drainage which is bad for cleaning and sanitation. Steam is ideal for dry facilities, plants without drains and facilities that are looking to evolve their sanitation methods to CIP and SIP.
Clean and Sanitize
Combination of vapor steam and vacuum achieves two tasks – cleans and sanitizes belt surface at the same time. High temperature and pressure from vapor steam not only break down grease or pollutants on the belt, but also remove microorganisms.
Required Steamer
OPTIMA XE 27K, SEII 27K/42K
Required Steam Hose
Power Steam Hose (P/N A70039, A70059, A70060)
Required Vacuum Hose
Heat Resistant Vacuum Hose (P/N 85-50088)
Vacuum Hose Inlet Diameter (E)
1.5” (38mm)
Recommended Belt
Closed surface type (flat belt)
Material
Stainless steel, Silicone
Cleaning Width (A)
20” / 610mm
Mounting Width (B)
23.6-31.5” (600-800mm)
Adjustable Chamber Height (D)
5.9” (150mm)
Steam Vacuum Chamber Size
19.69×10.24×17.3” (500x260x225mm)
Dimensions (L x W x H) (mm)
Part #85-50083: 35.4×10.2×17.3” (900x260x440mm) Part #85-50131: 55.1×10.2×17.3” (1400x260x440mm)
Weight
26.5 (12 kg)
*Note: The Vacuum Conveyor Belt Cleaning Tool is recommended for closed belt types and is best used with 10m Power hose part # 70039. For open belts, we recommend the Pneumatic Conveyor Belt Cleaning Tool.
